Generally choose the crossover type steel wire rope which has the quality certification so that it will not be twisted and loosened when lifting goods.
Asbestos core and heat-resistant steel wire rope should be chosen when lifting hot or molten metal goods.
The hoisting and luffing mechanism should not be intertwined with the steel wire rope to make it longer. Any other mechanism needs to make the wire rope longer, it must ensure that the joint strength is no less than 90% of the breaking strength of the steel wire rope and should not pass the pulley and cover on the drum.
Features of Wire Rope Slings
Flexibility and resistance to abrasion are the major features of wire rope slings.
Lowest cost per ton of lifting of all slings.
Ideal for heavy loads and rugged conditions.
Wide ranges of possible and terminations
Wire Rope Sling Fabrication
A basic wire rope sling is fabricated by cutting a length of wire rope, unlaying the rope a bit at each end, and weaving the wires back together in the form of a loop. Then, the rope tails are secured by tucking them into a swaging sleeve.
Wire Rope Slings Measurement and Sizes
How to measure and specify wire rope slings? Wire rope diameter and sling length are the key parameters. The length of a wire rope sling refers to the distance from the bearing surface of one eye to the bearing surface of the opposite eye, as shown in the above picture of the wire rope sling. The sizes of wire rope slings are presented in the picture above. These dimensions are considered approximated as they will slightly depending on the individual who fabricates the sling.
Types of Wire Rope Slings
There are 4 types of single-let wire rope slings, ie., the single-part Flemish eye mechanical splice slings, multi-part braided slings, cable laid slings, and Grommet which also can be classified into cable laid and strand laid. Single-part Flemish eye mechanical splice slings Single-part Flemish eye mechanical splice slings are fabricated with a single length of wire rope, typically EIPS grade, and with Flemish mechanical splices.
Multi-part braided slings
Multi-parts branded slings are wire rope slings fabricated by taking a sling long length of aircraft cable or IWRC wire rope and braiding it back and forth along the entire sling design length- including the sling eyes, to form a single, high-capacity sling.
Cable laid slings
Cable-laid slings are fabricated from small-diameter galvanized aircraft cable or IWRC wire rope.
Gromet
A Grommet is a unique type of wire rope sling which forms a continuous loop. There are two basic types of grommets: cable-laid and strand-laid. The cable grommets are like cable-laid slings which are rarely used in modern rigging while the strand-laid grommets are fabricated from one continues length of small diameter galvanized aircraft cable strand or IWRC wire rope strand.
